You have no items to compare.
You're currently on:
Features
• Odor Free
• No VOCs
• No Enzymes
• Nontoxic
• Colorless
• Hypoallergenic
• No Soapy Sticky Residue
ENVIRONMENTALLY SAFER - This product meets the Green Seal™ environmental standard for industrial and institutional cleaners based on its reduced human and environmental toxicity and reduced volatile organic compound content.
PROCYON Carpet & Upholstery Cleaner can be used with hot or cold water and can be used as a prespray or with cleaning systems such as truck mounts, steam cleaners, portable extractors, rotary scrubbers as well as for bonnet cleaning. It offers enormous cost savings by eliminating the need for products such as traffic lane pre-sprays, defoamers, and acidic rinse agents. And, with its exceptional dilution ratio, your actual costs can be as low as 1/10th of a penny per sq. ft. of carpet cleaned.
Plus Powder will remove the ground-in dirt from severely soiled traffic lanes. It will also remove tough spots and stains caused by blood, various inks, road tar, ketchup, shoe polish, tea, coffee, food and beverage residues, and more!
Directions for Use:
User assumes all liability and risk. Using more is NOT better. Use as directed.
PROCYON Plus comes with an easy-measure scoop:
1 level scoop = 2 oz.
Dwell Time = Approx. 10 minutes
PRE-SPRAY:
Portable Sprayer: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell. Extract with fresh water.
Bonnet Cleaning: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell.
Hydro Force: Mix 16 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Fresh water rinse.
PRE-SPRAY -- HEAVY GREASE & OIL:
Portable Sprayer: Mix 4 oz. to 1 gallon HOT water. Allow to dwell. Follow with In Tank directions.
Hydro Force: Mix 24 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Follow with In
Tank directions.
IN TANK ONLY:
Portable Extractor: Mix 4 oz. to 5 gallons of HOT water.
Truck Mount: Mix 16 oz. to 5 gallons of HOT water. Set Meter on 4-6. Heat setting at 180° to 200° F
is recommended.
UPHOLSTERY: As with any cleaning method, always test for color fastness in an out-of-the way area.
Pre-Spray - Portable Sprayer: Mix 2 oz. to 5 gallons of HOT water. Always apply solution from the
base wetting upward to prevent streaking or runs.
Pre-spray - Hydro Force: Follow In Tank Truck Mount directions. Set meter on 2, reduce heat.
• No VOCs
• No Enzymes
• Nontoxic
• Colorless
• Hypoallergenic
• No Soapy Sticky Residue
ENVIRONMENTALLY SAFER - This product meets the Green Seal™ environmental standard for industrial and institutional cleaners based on its reduced human and environmental toxicity and reduced volatile organic compound content.
PROCYON Carpet & Upholstery Cleaner can be used with hot or cold water and can be used as a prespray or with cleaning systems such as truck mounts, steam cleaners, portable extractors, rotary scrubbers as well as for bonnet cleaning. It offers enormous cost savings by eliminating the need for products such as traffic lane pre-sprays, defoamers, and acidic rinse agents. And, with its exceptional dilution ratio, your actual costs can be as low as 1/10th of a penny per sq. ft. of carpet cleaned.
Plus Powder will remove the ground-in dirt from severely soiled traffic lanes. It will also remove tough spots and stains caused by blood, various inks, road tar, ketchup, shoe polish, tea, coffee, food and beverage residues, and more!
Directions for Use:
User assumes all liability and risk. Using more is NOT better. Use as directed.
PROCYON Plus comes with an easy-measure scoop:
1 level scoop = 2 oz.
Dwell Time = Approx. 10 minutes
PRE-SPRAY:
Portable Sprayer: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell. Extract with fresh water.
Bonnet Cleaning: Mix 2 oz. to 1 gallon of HOT water. Allow to dwell.
Hydro Force: Mix 16 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Fresh water rinse.
PRE-SPRAY -- HEAVY GREASE & OIL:
Portable Sprayer: Mix 4 oz. to 1 gallon HOT water. Allow to dwell. Follow with In Tank directions.
Hydro Force: Mix 24 oz. to 5 quarts of HOT water (8 to 1 ratio). Allow to dwell. Follow with In
Tank directions.
IN TANK ONLY:
Portable Extractor: Mix 4 oz. to 5 gallons of HOT water.
Truck Mount: Mix 16 oz. to 5 gallons of HOT water. Set Meter on 4-6. Heat setting at 180° to 200° F
is recommended.
UPHOLSTERY: As with any cleaning method, always test for color fastness in an out-of-the way area.
Pre-Spray - Portable Sprayer: Mix 2 oz. to 5 gallons of HOT water. Always apply solution from the
base wetting upward to prevent streaking or runs.
Pre-spray - Hydro Force: Follow In Tank Truck Mount directions. Set meter on 2, reduce heat.
Additional Information
| Manufacturer | Procyon |
| Application / Use | Soapfree Carpet, Upholstery, and Fabric Cleaner. |
| Dilution(s) | See Directions above |
| Approvals | Green Seal Certified | Carpet and Rug Institute Seal of Approval | IAQ Indoor Air Quality Approved (NO VOCs) |
| Automatic Discounts | Buy 4 Jars and Receive 10% off! |
| Packaging | 1 (6lb.) Jar | 4 Jars/Case |
| pH | @ Ready to Use: 9.5 |
| M.S.D.S | Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
| Manufacturer Link(s) | Procyon | Plus Manufacturing |