
Wood is one of the most attractive materials for commercial interiors, creating a warm and inviting atmosphere. However, over time, wood surfaces can be subject to wear, color loss, and damage. In this article, we will look at effective remedies and methods for restoring wood surfaces in commercial spaces.
Surface Cleaning
The first step in restoring wood surfaces is to thoroughly clean dust, dirt, and other contaminants. It is recommended to use a soft brush or a damp cloth for this task. In the case of stubborn stains and old layers of varnish or paint, you can apply special wood cleaners or solvents.
Sanding the surface
Sanding helps in removing the damaged layer of wood, leveling the surface and making it smooth. You can use a hand sander for small surfaces and an electric sander for larger areas. It is important to choose the right abrasive grit depending on the extent of the damage.
Filling cracks and chips
After sanding, it is possible to find cracks and chips on the surface of the wood. Special wood mastics or epoxy resins are used to repair them. After filling cracks and chips, the surface is re-sanded for a smooth and uniform appearance.
Coating with varnish or oil
After the preparatory work, the wooden surface must be protected to prevent re-wear and corrosion. For this purpose, wood varnishes, oils or waxes can be used. The choice of coating depends on the surface usage and the desired aesthetic effect.
Tinting and staining
If it is necessary to change the shade or color of the wood, wood tinting agents or paints can be used. Tinting agents allow the grain of the wood to be retained, while paints give the surface a dense and uniform finish.
Polishing
Polishing is the final touch when restoring wood surfaces. It gives the surface extra shine and protection, and helps to emphasize the natural beauty of the wood.
Restoring wood surfaces in commercial interiors is an important process that requires attention to detail and the right approach. Proper cleaning, sanding, crack filling, protective coating and, if necessary, tinting or staining can restore wood to its original condition or give it a stylish new look. The use of quality products and the use of the right methods will ensure the longevity and attractive appearance of wood surfaces in commercial spaces.