You have no items to compare.
Features
• Seals and protects grout, and porous tile and stone
• Penetrates surface to repel dirt, grease and stains
• Protects with advanced fluoropolymer technology
• Water-based for fast, easy application
Directions: Intended for use as a sealer on clean, porous grout lines and porous tile and stone, which are in good condition. Not recommended for dirty, painted, treated or non-porous surfaces.
Surface preparation: Clean grout and tile thoroughly with Professional Grout Cleaner according to label directions. Rinse floor thoroughly with clean water, and remove residual water with a clean mop or towels. Allow floor to dry to 30 minutes or until there is no visible water on floor or in grout lines.
Application: Pretest in an inconspicuous location to ensure desirability of appearance and end results. Apply Water Based Tile and Grout Sealer undiluted to grout joints, using a pump sprayer, or a new lambswool applicator. Avoid over-spray or contact with surrounding surfaces. Work on a small area of floor at a time, ensuring that all grout joints receive sealer. Use squeegee to move excess sealer from non-porous tile surfaces. After 20 minutes wipe treated area completely with damp microfiber cloth, rinsing cloth in clean water frequently. A second coat will provide longer protection, and can be applied after 30 minutes. Keep area closed to foot traffic for at least 8 hours. Sealer cures completely within 24 hours. If any residue is visible one hour after application, wipe up with damp microfiber cloth.
• Penetrates surface to repel dirt, grease and stains
• Protects with advanced fluoropolymer technology
• Water-based for fast, easy application
Directions: Intended for use as a sealer on clean, porous grout lines and porous tile and stone, which are in good condition. Not recommended for dirty, painted, treated or non-porous surfaces.
Surface preparation: Clean grout and tile thoroughly with Professional Grout Cleaner according to label directions. Rinse floor thoroughly with clean water, and remove residual water with a clean mop or towels. Allow floor to dry to 30 minutes or until there is no visible water on floor or in grout lines.
Application: Pretest in an inconspicuous location to ensure desirability of appearance and end results. Apply Water Based Tile and Grout Sealer undiluted to grout joints, using a pump sprayer, or a new lambswool applicator. Avoid over-spray or contact with surrounding surfaces. Work on a small area of floor at a time, ensuring that all grout joints receive sealer. Use squeegee to move excess sealer from non-porous tile surfaces. After 20 minutes wipe treated area completely with damp microfiber cloth, rinsing cloth in clean water frequently. A second coat will provide longer protection, and can be applied after 30 minutes. Keep area closed to foot traffic for at least 8 hours. Sealer cures completely within 24 hours. If any residue is visible one hour after application, wipe up with damp microfiber cloth.
Additional Information
SKU | PCB462 |
Manufacturer | Prochem |
Application / Use | High grade water based protector for porous stone, tile and grout |
Dilution(s) | Ready to Use |
Automatic Discounts | Buy 4 Gallons and Receive 10% OFF! |
Packaging | 1 Gallon | 4 Gallons/Case |
pH | 7.9 - 8.4 @ Ready to Use |
S.D.S. | Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
Manufacturer Link(s) |