You have no items to compare.
Features
Advanced Peroxide Cleaner is the most advanced cleaner available for the restoration and remediation professional. Advanced Peroxide Cleaner is formulated specifically for use on mold remediation and water damage restoration projects. Advanced Peroxide Cleaner aggressively removes stains caused by mold and mildew on porous, semi-porous, and non-porous materials.
Utilizing a proprietary combination of cutting-edge surfactants and advanced hydrogen peroxide, Fiberlock’s Advanced Peroxide Cleaner produces results that, up until this point, have not been attainable in a contractor friendly formula. When applied, Advanced Peroxide Cleaner penetrates deep into the substrate. The hydrogen peroxide reacts instantly through an oxidation process that produces a high foaming action which lifts the material to the surface. The oxidation process continues for some time after application and results in the brightening of the substrate within 24 hours.
Directions for Use: Advanced Peroxide Cleaner can be applied with a trigger or pump sprayer, airless spray or mop/brush. When applying, saturate the affected material with enough product to remain wet for at least 10 minutes.
1. Provide Advanced Peroxide Cleaner enough time to work its way into the substrate and lift matter out through the foaming action. The dwell time will depend on the thickness and porosity of the substrate but is usually 5 to 10 minutes.
2. After a layer of foam has developed agitation will assist in removing more matter. Use a stiff nylon bristle brush to fully agitate the surface.
3. As Advanced Peroxide Cleaner dwells on the surface it will continue to lift material and remove staining.
4. Advanced Peroxide Cleaner reacts with organic material decomposing into oxygen and water. A second application of Advanced Peroxide Cleaner may be necessary in order to achieve the desired results.
5. Once cleaning is complete allow the area to dry fully. The full brightening effects will be seen within 24 hours. After cleaning, apply one of Fiberlock’s IAQ mold resistant coatings to lock down residual particulate and provide long term mold resistance. Prior to coating application thoroughly clean surface (such as HEPA vac or damp wipe) to ensure proper adhesion.
Coverage:
Porous surfaces - 500 square feet per gallon
Non-porous surfaces - Up to 1200 square feet per gallon
Utilizing a proprietary combination of cutting-edge surfactants and advanced hydrogen peroxide, Fiberlock’s Advanced Peroxide Cleaner produces results that, up until this point, have not been attainable in a contractor friendly formula. When applied, Advanced Peroxide Cleaner penetrates deep into the substrate. The hydrogen peroxide reacts instantly through an oxidation process that produces a high foaming action which lifts the material to the surface. The oxidation process continues for some time after application and results in the brightening of the substrate within 24 hours.
Directions for Use: Advanced Peroxide Cleaner can be applied with a trigger or pump sprayer, airless spray or mop/brush. When applying, saturate the affected material with enough product to remain wet for at least 10 minutes.
1. Provide Advanced Peroxide Cleaner enough time to work its way into the substrate and lift matter out through the foaming action. The dwell time will depend on the thickness and porosity of the substrate but is usually 5 to 10 minutes.
2. After a layer of foam has developed agitation will assist in removing more matter. Use a stiff nylon bristle brush to fully agitate the surface.
3. As Advanced Peroxide Cleaner dwells on the surface it will continue to lift material and remove staining.
4. Advanced Peroxide Cleaner reacts with organic material decomposing into oxygen and water. A second application of Advanced Peroxide Cleaner may be necessary in order to achieve the desired results.
5. Once cleaning is complete allow the area to dry fully. The full brightening effects will be seen within 24 hours. After cleaning, apply one of Fiberlock’s IAQ mold resistant coatings to lock down residual particulate and provide long term mold resistance. Prior to coating application thoroughly clean surface (such as HEPA vac or damp wipe) to ensure proper adhesion.
Coverage:
Porous surfaces - 500 square feet per gallon
Non-porous surfaces - Up to 1200 square feet per gallon
Additional Information
| SKU | FI8314-GROUP |
| Manufacturer | Fiberlock |
| Application / Use |
Porous, Semi-Porous, and Non-Porous surfaces/materials that stained with mold and mildew. Product can be applied with tigger or pump sprayer, airless spray or mop/brush. Product Data Sheet - Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
| Dilution(s) | Ready to Use - DO NOT DILUTE |
| Approvals | No |
| Automatic Discounts | Buy 2 (2.5 gallons) and Receive 10% Off. Buy 4 Gallons and Receive 10% Off. |
| Packaging | 1 Gallon | 4 Gallons/Case 2.5 Gallon | 2 (2.5gl)/Case |
| pH | 7.5 - 8.5 |
| S.D.S. | Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
| Manufacturer Link(s) |
