Category Navigation:

Serum 1000 Accelerator

Serum 1000 Accelerator

Serum Systems

Availability: In stock.

Product Name Price Qty
Serum 1000 Accelerator $15.74
Add Items to Cart

Quick Overview

Serum 1000 Accelerator is a chemical additive designed to hyper-accelerate the chemical properties of Serum 1000 to achieve a highly potent organic contamination and mold staining removal product. Serum 1000 Accelerator not only speeds up the rate at which Serum 1000 works and cleans surfaces, it also greatly improves the products ability to bleach out any organic staining cause by mold and mildew on difficult to clean surfaces. Only for use with Serum Systems Serum 1000 product.

Features

The Accelerator is designed to cause Serum 1000 to create billions of hydroxyl radicals to super charge it's bleaching qualities. Now with the Accelerator, you can clean the organics faster because of it's super excited state and be assured that all the staining will be bleached away improving the aesthetics of all surfaces being cleaned. The Accelerator is packaged as 15 ounces in a quart bottle, which is what is required to accelerate five (5) gallons of Serum 1000. If less accelerated product is desired, you may measure and add three (3) ounces of Accelerator per each gallon of Serum 1000 that you would like to treat and accelerate.

DO NOT MIX THIS WITH SERUM 1000 UNTIL YOU ARE READY TO SPRAY

Shelf life of Accelerated Serum 1000 is approximately one and one half to two days. (1.5-2 days). Any run off from spraying accelerated Serum 1000 that may occur is pH 9. The only by product of the accelerated Serum 1000 is water, oxygen and potassium acetate (a food additive).

Instructions for boosting Serum 1000 with Accelerator for best results
1. Remove cap from 5 gallon pail of Serum 1000.
2. Pour entire contents of Serum 1000 Accelerator into the 5 gallons pail of Serum 1000.
3. Place the Airless Sprayer pickup tube into the 5 gallon pail of Serum 1000 just treated with the Serum 1000 Accelerator.
4. Spray the accelerated Serum 1000 on all surfaces in the contained area as normal.
5. Where necessary, the use of a stiff bristle deck brush to agitate areas of thick visible mold or heavy dark spots while spraying those areas with accelerated Serum 1000.
6. Product will foam up on contact with live organics. Re-spray areas after about 10 minutes. Once foaming has stopped

Surfaces with high amounts of live organic contamination once treated with accelerated Serum 1000 will begin to foam up immediately and profusely. An active, high foaming reaction of accelerated Serum 1000 with the treated area is a strong visual indicator that great results will be achieved.

How to store left over, Accelerated Serum 1000
At the end of a job, if you have a partial pail of accelerated Serum 1000 remaining, do not screw the cap on the pail tight. Screw it on till a few threads catch leaving the cap to be able to vent any pressure build up in the pail.

The shelf life of Accelerated Serum 1000 is roughly 36 hours. Any runoff from spraying accelerated Serum 1000 that may occur has a pH of 9.0. The only by products of the accelerated Serum 1000 is water, oxygen and potassium acetate (a food additive).

Additional Information

SKU serum-1000-accelerator
Manufacturer Serum Systems
Application / Use Boosting agent for Serum 1000 by Serum Systems. Do not use with any other products.
Dilution(s) Pour entire 15 ounce contents of Serum 1000 Accelerator into 5 gallon pail of Serum 1000 to make 5 gallons of Accelerated Serum 1000. To make single gallons of accelerated Serum 1000 add 3.5 ounces of Serum 1000 Accelerator to 128 ounces (1 US Gallon) of Serum 1000.
Automatic Discounts Not available for this product
Packaging Quart Bottle - 15 ounces of product | 12 per Case
Manufacturer Link(s)

Featured Manufacturer

Rotovac 360i Rotary Extraction Equipment

 

Search by Manufacturer

Compare Products

You have no items to compare.