You have no items to compare.
Features
For best results use the Unsmoke System:
Step 1: Suppress odor sources by low pressure spraying with odor counteractant (3-6 oz. 9-D-9 or Double O per gallon of water). Smoke odors in charred wood, attic insulation, and ceiling/wall voids may be contained by spraying the following mixture: In an empty 5 gallon pail, add 1 Gallon Unsoot Encapsulant, 1 quart 9-D-9, 5 oz. Last Resort, fill with water to make 5 gallons. Covers 500-750 sq. ft. per gallon when applied with airless paint sprayer.
Step 2: Apply 2-4 oz. of dry Crystal Odor Counteractant (C.O.C.) per hundred sq. ft. of floor area.
Step 3: Thermal fogging. Prior to fogging, review directions below.
Step 4: Exhaust / Ventilation.
Direction / Cautions for Thermal Fogging:
1. Ensure application equipment is in good working order and applicator is experienced in equipment operation.
2. Review Unsmoke indoor fogging precautions.
3. Evacuate treatment area.
4. Remove or protect food and utensils.
5. Cover materials that are potentially adversely affected by solvent based formulations.
6. Issue respirator to application personnel.
7. Best results are achieved when temperature of area to be treated is above 55 degrees Fahrenheit.
8. Apply Thermo 55 at a rate of 0.5 to 1 ounce per one thousand cubic feet of treatable space.
9. To minimize residual product odor after treatment, exhaust / ventilate treated area prior to reentry or re-occupancy.
Step 1: Suppress odor sources by low pressure spraying with odor counteractant (3-6 oz. 9-D-9 or Double O per gallon of water). Smoke odors in charred wood, attic insulation, and ceiling/wall voids may be contained by spraying the following mixture: In an empty 5 gallon pail, add 1 Gallon Unsoot Encapsulant, 1 quart 9-D-9, 5 oz. Last Resort, fill with water to make 5 gallons. Covers 500-750 sq. ft. per gallon when applied with airless paint sprayer.
Step 2: Apply 2-4 oz. of dry Crystal Odor Counteractant (C.O.C.) per hundred sq. ft. of floor area.
Step 3: Thermal fogging. Prior to fogging, review directions below.
Step 4: Exhaust / Ventilation.
Direction / Cautions for Thermal Fogging:
1. Ensure application equipment is in good working order and applicator is experienced in equipment operation.
2. Review Unsmoke indoor fogging precautions.
3. Evacuate treatment area.
4. Remove or protect food and utensils.
5. Cover materials that are potentially adversely affected by solvent based formulations.
6. Issue respirator to application personnel.
7. Best results are achieved when temperature of area to be treated is above 55 degrees Fahrenheit.
8. Apply Thermo 55 at a rate of 0.5 to 1 ounce per one thousand cubic feet of treatable space.
9. To minimize residual product odor after treatment, exhaust / ventilate treated area prior to reentry or re-occupancy.
Additional Information
| SKU | UP2413C-GRP |
| Manufacturer | Prorestore |
| Application / Use | Application Equipment: Thermo-55 is specially formulated to achieve best results when applied in Thermal Fogging Devices such as Thermo-Gen and Electro-Gen units, but acceptable results may be achieved when Thermo-55 is applied with misting apparatus such as ULV fogging devices. |
| Dilution(s) | Ready to use solution for use in THERMAL FOGGING equipment only |
| Approvals | V.O.C. Compliant |
| Automatic Discounts | Buy 4 Gallons and Receive Case Quantity Discount |
| Packaging | 1 Gallons | 4 Gallons/Case |
| pH | Not Applicable - Non aqueous solution |
| S.D.S. | Neutral - Left Click to view .PDF | Right Click and Save Link As to Download .PDF |
| Manufacturer Link(s) |
You may also be interested in the following product(s)
|
ElectroGen Thermal FoggerRegular Price: $310.00 Special Price: $295.00 |
Thermo-Gen VF Thermal Fogger
$2,766.00
|
