Lamanator Plus Restoration

Lamanator Restoration will adhere to all direct and high pressure surfaces, enabling the user to seal the floor with variable gloss levels, depending on the number of coats applied. The more coats of Lamanator Restoration you apply, the higher the gloss level

Directions:
• Use Lamanator Plus Deep Scrub to remove dirt, oil, and grease build-up.
• Mist Lamanator Plus Restore onto floor evenly.
• Using microfiber mop, spread evenly in one direction. Allow 20-30 minutes between coats.
• For maintenance of scuffs and scratches, mist Restore, wipe with sponge, and let dry.
• Continue to use Lamanator Plus Buff Dry Cleaner & Revitalizer to keep your laminate floors looking their daily best.

Lamanator Restoration coating will last up to 1 year or more depending on foot traffic.
Approximate Coverage: 800 square feet per Quart (32oz.). Approximate coverage is based on a single coat. Two coats are recommended. (400 square feet per Quart for 2 coats)

Note:Each coat that you apply will raise the shine by a 30% gloss level. If your floor is dull, then it will look like more of a satin like finish with the first coat. By applying a second coat, you will achieve a beautiful shine.